Root Redmi 2 / Prime Lollipop
How To Root Redmi 2 / Prime Lollipop Using Fastboot
You must download
*MiPC Suite (for driver your phone to connect to PC)
*File Root.zip puts to sdcard/phone (put out a folder)
*TWRP Fastboot :
TWRP 3.0.0.1 fastboot LP for Device Build 11, 17, 18, 19, 21
TWRP 3.0.0.1 fastboot LP for Device Build 13, 16, 12
1; Instal MiPC Suite, after done.
2; Extract TWRP after extracted, open folder and Press Button Shift + Right Click on mouse/touchpad and select Open Command Windows Here and will open a command prompt window.
3; Turn off your phone and boot into fastboot mode (Press Vol down (-) and the Power button) and connect it to the PC and wait for the drivers installed automatically.
4; In the CMD (command prompt) write fastboot devices and will be like the picture below.
5; Write again fastboot flash recovery recovery.img if successful it will be like the picture below.
6; Turn off the phone by removing the battery and enter TWRP (press button vol + (up) and button vol down (-) and press the power button) and release the power button when vibrating.
7; In TWRP Select Install > Select Storage and brows and select your file Root.zip and swipe button to flash file.
8; After booting is complete check whether there are applications SuperSU or not, if there are mean successfully.
9; And Done.
You must download
*MiPC Suite (for driver your phone to connect to PC)
*File Root.zip puts to sdcard/phone (put out a folder)
*TWRP Fastboot :
TWRP 3.0.0.1 fastboot LP for Device Build 11, 17, 18, 19, 21
TWRP 3.0.0.1 fastboot LP for Device Build 13, 16, 12
1; Instal MiPC Suite, after done.
2; Extract TWRP after extracted, open folder and Press Button Shift + Right Click on mouse/touchpad and select Open Command Windows Here and will open a command prompt window.
3; Turn off your phone and boot into fastboot mode (Press Vol down (-) and the Power button) and connect it to the PC and wait for the drivers installed automatically.
4; In the CMD (command prompt) write fastboot devices and will be like the picture below.
5; Write again fastboot flash recovery recovery.img if successful it will be like the picture below.
6; Turn off the phone by removing the battery and enter TWRP (press button vol + (up) and button vol down (-) and press the power button) and release the power button when vibrating.
7; In TWRP Select Install > Select Storage and brows and select your file Root.zip and swipe button to flash file.
8; After booting is complete check whether there are applications SuperSU or not, if there are mean successfully.
9; And Done.
Tested On Xiaom Redmi 2 (MIUI 7.2 Lollipop 2014817)
